PolyScience Immersion Circulators

Overview

Create a circulating bath using your own vessel with an MX Immersion Circulator, or with a PolyScience open-bath tank. 

Immersion Circulators

Some key specifications are in the table below, and additional features for each controller are listed below the table.

	MX Immersion Circulator
Working Temperature (°C)	Ambient +10° to 135°
Heating	1100 W
Temp. Stability	±0.07°C
Maximum Reservoir Capacity	28 liters
Maximum Flow Rate  (L/min)	13.5
Maximum Pressure (psi)	2.30
Pump	Pressure
Temperature Calibration Capability	1-point
Safety Rating*

*DIN 12876-1 Class III devices are rated for use with flammable liquids.

 

MX Immersion Circulator

• Large, universal icon and English display
• On-screen prompts
• Single-point calibration capability
• For laboratory use only

The MX Immersion Circulator should only be mounted to tanks with a working depth of 7.25" (18.4 cm) or more. It clamps securely to both straight and curved tank walls

Key Attributes

Type	Stirred / Circulating Baths
Incubation	Yes
Refrigeration	No
Temp Range (°C)	A +10 to 135
Capacity (L)	N/A
Circulation	Internal Only
Brand	PolyScience
MaxFlow Rate (l/min)	6, 13.5
Temp Stability (°C)	±0.07
Timer	No
Alarms	Yes
Digital or Mechanical	Digital
Data connection	No
Tank Material	N/A
Sample Agitation	No
Media Racks Available	No
Warranty (years)	2
Weight (lb)	10
Width (in)	6.5
Depth (in)	3.75
Height (in)	14

Manufacturer Specifications

	MX Immersion Circulator
Working Temperature Range °C	Ambient +10° to 135°
Temperature Stability °C	±0.07°
Reservoir Capacity (liters)	28
Reservoir/Tank Material	N/A
Display	3.25" LCD
Display Resolution (Set)	0.01
Display Resolution (Read)	0.001
Pump Type	Pressure
Pump Speed	One
Flammability Class (DIN 12876-1)	I (NFL)
Maximum Ambient Temperature °C	35°
Overall Dimensions (L x W x H) (inches)	4.3 x 3.8 x 14.1
Shipping Weight (pounds)	10
Maximum Pressure (psi)	2.3
Maximum Pressure Flow Rate (l/min)	13.5
Heater Wattage	1100
Electrical Requirements (VAC/Hz/Ph/A)	120/60/1/10
Regulatory Approvals	ETL

FAQ

I would like to perform a heating / cooling program where the temperature ramps from one set point to another over time. Are the PolyScience Immersion Circulators capable of this?

No, they are not. For that, you will need one of the PolyScience circulating baths with an Advanced Programmable or Performance Programmable controller.

Can I use the PolyScience Immersion Circulator with only the heat on (no circulation)?

No. If the heat is on, the circulation must also be on.